EnoughToGet CalculatorsGuides

Paint & plaster

Paint calculator

How many litres of paint for a room, and which cans to buy, with doors, windows and the ceiling taken into account.

Try itPaint: enter your own sizes
m
Type metres, for example 4.2.
m
m
Each door is taken off the wall area.
Each window is taken off the wall area.
The ceiling uses the same paint here. Ceiling paint is often a different product.
Two coats is the usual advice on the label.
%
Covers rough surfaces and touch-ups.
You need
4.51 L
buy 5 L in cans

Shopping list

ItemBuyNote
Paint needed4.51 L2 coats over 32.8 m²
4 L can1 can5 L bought in total
1 L can1 can5 L bought in total
  • Coverage is 16 m² per litre (Dulux calculator). Check the spread rate on your can: textured walls and dark colours use more.
How this was worked out
  1. Wall area: perimeter × height
    2 × (4 + 3.5) × 2.4 = 36 m²
  2. Minus openings: walls − doors × door area − windows × window area
    36.00 − 1 × 1.7 − 1 × 1.5 = 32.8 m²
  3. Paint needed: area × coats × (1 + waste) ÷ coverage
    32.80 × 2 × 1.10 ÷ 16 = 4.51 L

Paint needed by size

Room (m, walls only)Main resultShopping list
3 × 33.52 L3.52 L Paint needed; 1 can 4 L can
3.5 × 33.85 L3.85 L Paint needed; 1 can 4 L can
4 × 3.54.51 L4.51 L Paint needed; 1 can 4 L can; 1 can 1 L can
5 × 45.5 L5.5 L Paint needed; 1 can 4 L can; 1 can 2 L can
6 × 56.82 L6.82 L Paint needed; 1 can 4 L can; 1 can 2 L can

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Wall area: perimeter × height
    2 × (4 + 3.5) × 2.4 = 36 m²
  2. Minus openings: walls − doors × door area − windows × window area
    36.00 − 1 × 1.7 − 1 × 1.5 = 32.8 m²
  3. Paint needed: area × coats × (1 + waste) ÷ coverage
    32.80 × 2 × 1.10 ÷ 16 = 4.51 L

What to enter

FieldUnitHelp
Room lengthmType metres, for example 4.2.
Room widthm
Wall heightm
DoorsEach door is taken off the wall area.
WindowsEach window is taken off the wall area.
CeilingchooseThe ceiling uses the same paint here. Ceiling paint is often a different product.
CoatsTwo coats is the usual advice on the label.
Extra for waste%Covers rough surfaces and touch-ups.

Before you buy

Frequently asked questions

How do I calculate paint?

How many litres of paint for a room, and which cans to buy, with doors, windows and the ceiling taken into account. Enter your sizes in the calculator. It works out wall area (perimeter × height) and the later steps, then rounds up to whole packs.

Where does the paint coverage per litre figure come from?

16 m2/L. Dulux paint calculator page: estimates assume two-coat topcoat coverage at a spread rate of 16 m2 per litre (check the can). Checked against its source on 2026-11-18.

Where does the paint coats figure come from?

2 coats. Dulux paint calculator page: assumes 2 coats of topcoat, the ideal number for most Dulux paints. Checked against its source on 2026-11-18.

Where does the paint waste figure come from?

10 %. common trade rule of thumb for touch-ups and spillage, editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the paint door area figure come from?

1.7 m2. approx. standard 2040 x 820 mm internal door, editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
paint coverage per litre16 m2/L
New Zealand: 11 m2/L
Verified 2026-11-18Dulux paint calculator page: estimates assume two-coat topcoat coverage at a spread rate of 16 m2 per litre (check the can).
paint coats2 coatsVerified 2026-11-18Dulux paint calculator page: assumes 2 coats of topcoat, the ideal number for most Dulux paints.
paint waste10 %Editable defaultcommon trade rule of thumb for touch-ups and spillage, editable
paint door area1.7 m2Editable defaultapprox. standard 2040 x 820 mm internal door, editable
paint window area1.5 m2Editable defaulttypical window opening, editable
paint can size 1l1 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 2l2 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 4l4 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 10l10 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 15l15 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.

Guides for this calculator

Related calculators