EnoughToGet CalculatorsGuides

Landscaping

Soil, gravel and mulch calculator

Garden beds, paths and driveways: cubic metres and tonnes of soil, sand, gravel, road base or mulch, with the bag alternative.

Try itSoil, gravel and mulch: enter your own sizes
m
Type metres, for example 4.5.
m
mm
Mulch is usually 75 to 100 mm, a gravel path about 50 mm, topsoil for a lawn about 100 mm.
Weights per cubic metre come from supplier data sheets. Loose road base is lighter than compacted road base.
%
Soil and mulch settle. For road base the depth is the finished, compacted layer and the loose volume is worked out for you.
Only used for the bag alternative. Check the volume on your bag.
You need
0.69 m³
about 0.28 t, or 23 bags of 30 L

Shopping list

ItemBuyNote
Mulch, woodchip, bulk0.69 m³about 0.28 t at 0.4 t/m³
Or bagged (30 L bags)23 bags690 L
How this was worked out
  1. Area: length × width
    4 × 2 = 8 m²
  2. Volume: area × depth ÷ 1000
    8.00 × 75 ÷ 1000 = 0.6 m³
  3. With extra: volume × (1 + allowance)
    0.600 × 1.15 = 0.69 m³
  4. Weight: volume with extra × density
    0.690 × 0.4 = 0.28 t
  5. Bags (30 L): litres with extra ÷ bag size, rounded up
    690 ÷ 30 = 23 bags

Soil, gravel and mulch needed by size

Size (m), 75 mm deepMain resultShopping list
2 × 10.17 m³0.17 m³ Mulch, woodchip, bulk; 6 bag Or bagged (30 L bags)
4 × 20.69 m³0.69 m³ Mulch, woodchip, bulk; 23 bag Or bagged (30 L bags)
5 × 31.29 m³1.29 m³ Mulch, woodchip, bulk; 44 bag Or bagged (30 L bags)
8 × 42.76 m³2.76 m³ Mulch, woodchip, bulk; 92 bag Or bagged (30 L bags)
10 × 54.31 m³4.31 m³ Mulch, woodchip, bulk; 144 bag Or bagged (30 L bags)

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Area: length × width
    4 × 2 = 8 m²
  2. Volume: area × depth ÷ 1000
    8.00 × 75 ÷ 1000 = 0.6 m³
  3. With extra: volume × (1 + allowance)
    0.600 × 1.15 = 0.69 m³
  4. Weight: volume with extra × density
    0.690 × 0.4 = 0.28 t
  5. Bags (30 L): litres with extra ÷ bag size, rounded up
    690 ÷ 30 = 23 bags

What to enter

FieldUnitHelp
LengthmType metres, for example 4.5.
Widthm
DepthmmMulch is usually 75 to 100 mm, a gravel path about 50 mm, topsoil for a lawn about 100 mm.
MaterialchooseWeights per cubic metre come from supplier data sheets. Loose road base is lighter than compacted road base.
Extra for settling and spillage%Soil and mulch settle. For road base the depth is the finished, compacted layer and the loose volume is worked out for you.
Bag sizechooseOnly used for the bag alternative. Check the volume on your bag.

Frequently asked questions

How do I calculate soil, gravel and mulch?

Garden beds, paths and driveways: cubic metres and tonnes of soil, sand, gravel, road base or mulch, with the bag alternative. Enter your sizes in the calculator. It works out area (length × width) and the later steps, then rounds up to whole packs.

Where does the landscape compaction allowance figure come from?

15 %. common rule of thumb for settling of loose fill when compacted, editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the landscape bag size 25l figure come from?

25 L. common retail bag size seen in Bunnings listings (page not fetchable), editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the landscape bag size 30l figure come from?

30 L. common retail bag size seen in Bunnings listings (page not fetchable), editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the landscape bag size 40l figure come from?

40 L. common retail bag size seen in Bunnings listings (page not fetchable), editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
landscape compaction allowance15 %Editable defaultcommon rule of thumb for settling of loose fill when compacted, editable
landscape bag size 25l25 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape bag size 30l30 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape bag size 40l40 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape bag size 50l50 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape density topsoil1.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: topsoil 1.4 t/m3.
landscape density garden mix1.2 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: garden mix 1.2 t/m3.
landscape density sand brickies1.45 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: brickies sand 1.45 t/m3.
landscape density sand river1.5 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: river sand 1.5 t/m3.
landscape density bluemetal1.45 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: blue metal 1.45 t/m3.
landscape density gravel river1.55 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: river gravel 1.55 t/m3.
landscape density roadbase loose1.75 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: road base/DGB/FCR 1.75 t/m3 (indicative, loose).
landscape density mulch woodchip0.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: woodchip mulch 0.4 t/m3.
landscape density mulch bark0.3 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: bark mulch 0.3 t/m3.
landscape density roadbase compacted2.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: road base/DGB/FCR 2.4 t/m3 (compacted figure).
landscape mulch depth100 mmVerified 2026-11-18Australian Native Landscapes mulch FAQ: mulch should be applied to a depth of 100 mm (Gardening Australia suggests 20-60 mm for coarse mulch).
landscape mulch depth light75 mmEditable defaultcommonly quoted 75 mm garden bed mulch depth, editable
landscape topsoil lawn depth100 mmEditable defaulttypical topsoil depth for a new lawn, rule of thumb, editable
landscape gravel path depth50 mmEditable defaulttypical gravel path top layer over compacted base, rule of thumb, editable

Guides for this calculator

Related calculators