EnoughToGet CalculatorsGuides

Framing & insulation

Wall framing calculator

Timber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres.

Try itWall framing: enter your own sizes
m
Type metres, for example 6.3.
m
Stud length. Studs are sold in set lengths: check yours.
Often 600 mm for internal walls and 450 mm for external walls. Your design decides.
Load-bearing walls often have a double top plate. Check your design.
For corners, door and window openings and wall junctions, counted by you from the plan.
%
You need
13 studs
12.0 m of plate

Shopping list

ItemBuyNote
Studs, 2.4 m long13 studs600 mm centres
Top and bottom plate12 msingle top plate; allow for lengths and cuts
Noggins11 noggins1 row between studs
  • Stud centres and noggin spacing here are common defaults (Bunnings and timber suppliers cite AS 1684). Framing size, spacing and bracing for a real wall come from your design.
How this was worked out
  1. Bays: wall length ÷ stud centres, rounded up
    6000 ÷ 600 = 10 bays
  2. Studs: (bays + 1 + extra studs) × (1 + waste), rounded up
    (10 + 1 + 0) × 1.10 = 12.1 studs
  3. Plates: wall length × (top plates + 1 bottom plate)
    6 × 2 = 12 m
  4. Noggin rows: wall height ÷ maximum noggin gap, rounded up, − 1
    2400 ÷ 1350 = 1 rows
  5. Noggins: rows × bays × (1 + waste), rounded up
    1 × 10 × 1.10 = 11 noggins

Wall framing needed by size

Wall length (m)Main resultShopping list
37 stud7 stud Studs, 2.4 m long; 6 m Top and bottom plate; 6 noggin Noggins
4.510 stud10 stud Studs, 2.4 m long; 9 m Top and bottom plate; 9 noggin Noggins
613 stud13 stud Studs, 2.4 m long; 12 m Top and bottom plate; 11 noggin Noggins
918 stud18 stud Studs, 2.4 m long; 18 m Top and bottom plate; 17 noggin Noggins
1224 stud24 stud Studs, 2.4 m long; 24 m Top and bottom plate; 22 noggin Noggins

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Bays: wall length ÷ stud centres, rounded up
    6000 ÷ 600 = 10 bays
  2. Studs: (bays + 1 + extra studs) × (1 + waste), rounded up
    (10 + 1 + 0) × 1.10 = 12.1 studs
  3. Plates: wall length × (top plates + 1 bottom plate)
    6 × 2 = 12 m
  4. Noggin rows: wall height ÷ maximum noggin gap, rounded up, − 1
    2400 ÷ 1350 = 1 rows
  5. Noggins: rows × bays × (1 + waste), rounded up
    1 × 10 × 1.10 = 11 noggins

What to enter

FieldUnitHelp
Wall lengthmType metres, for example 6.3.
Wall heightmStud length. Studs are sold in set lengths: check yours.
Stud centreschooseOften 600 mm for internal walls and 450 mm for external walls. Your design decides.
Top platechooseLoad-bearing walls often have a double top plate. Check your design.
Extra studsFor corners, door and window openings and wall junctions, counted by you from the plan.
Extra for cuts%

Before you buy

Frequently asked questions

How do I calculate wall framing?

Timber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres. Enter your sizes in the calculator. It works out bays (wall length ÷ stud centres, rounded up) and the later steps, then rounds up to whole packs.

Where does the framing stud spacing 450 figure come from?

450 mm. Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real spacing. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the framing stud spacing 600 figure come from?

600 mm. Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real spacing. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the framing noggin max gap figure come from?

1,350 mm. Bunnings how-to video: noggins at no more than 1350 mm between the top and bottom plates, with a second row for walls over 2.7 m. Check AS 1684 for your wall. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the framing waste figure come from?

10 %. Editable allowance for cuts and rejected lengths. No Australian source read gives a figure: a common framing rule of thumb. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

Related calculators