EnoughToGet CalculatorsGuides

Concrete & masonry

Mortar calculator

How many 20 kg bags of mortar mix for 1000 bricks or any number of bricks or blocks.

Try itMortar: enter your own sizes
Use the count from the bricks or blocks calculator, or your own.
Cement Australia: a 20 kg bag lays about 20 bricks or about 10 blocks.
%
Mortar dropped or left in the bucket.
You need
55 bags
about 605 L of mortar

Shopping list

ItemBuyNote
Mortar mix, 20 kg bags55 bags20 bricks a bag
  • Site-mixed mortar is usually 1 part cement, 1 part lime and 6 parts sand by volume (an indicative M3 mix). Use the mix your design calls for.
How this was worked out
  1. Bricks per bag: from the maker's data
    Cement Australia Mortar Mix = 20 bricks
  2. Bags: units × (1 + waste) ÷ per bag, rounded up
    1000 × 1.10 ÷ 20 = 55 bags (20 kg)

Mortar needed by size

BricksMain resultShopping list
25014 bag14 bag Mortar mix, 20 kg bags
50028 bag28 bag Mortar mix, 20 kg bags
100055 bag55 bag Mortar mix, 20 kg bags
2000110 bag110 bag Mortar mix, 20 kg bags
5000275 bag275 bag Mortar mix, 20 kg bags

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Bricks per bag: from the maker's data
    Cement Australia Mortar Mix = 20 bricks
  2. Bags: units × (1 + waste) ÷ per bag, rounded up
    1000 × 1.10 ÷ 20 = 55 bags (20 kg)

What to enter

FieldUnitHelp
Number of bricks or blocksUse the count from the bricks or blocks calculator, or your own.
LayingchooseCement Australia: a 20 kg bag lays about 20 bricks or about 10 blocks.
Extra for spills%Mortar dropped or left in the bucket.

Before you buy

Frequently asked questions

How do I calculate mortar?

How many 20 kg bags of mortar mix for 1000 bricks or any number of bricks or blocks. Enter your sizes in the calculator. It works out bricks per bag (from the maker's data) and the later steps, then rounds up to whole packs.

Where does the mortar bricks per 20kg bag figure come from?

20 bricks/bag. Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 20 house bricks at a 10 mm joint. Checked against its source on 2026-11-18.

Where does the mortar litres per 20kg bag figure come from?

11 L/bag. Cement Australia Mortar Mix data sheet: one 20 kg bag yields about 11 litres of mortar. Checked against its source on 2026-11-18.

Where does the block per 20kg mortar bag figure come from?

10 blocks/bag. Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint (a calculator site says about 17: the maker figure is used). Checked against its source on 2026-11-18.

Where does the mortar waste figure come from?

10 %. Editable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
mortar bricks per 20kg bag20 bricks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 20 house bricks at a 10 mm joint.
mortar litres per 20kg bag11 L/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag yields about 11 litres of mortar.
block per 20kg mortar bag10 blocks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint (a calculator site says about 17: the maker figure is used).
mortar waste10 %Editable defaultEditable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb.
mortar sand cement ratio m36 parts sand per 1 cementEditable defaultThe Brick Pit (citing Cement Australia and Think Brick): common M3 mortar mix is 1 cement : 1 lime : 6 sand by volume. Indicative only.

Related calculators