EnoughToGet CalculatorsGuides

Concrete & masonry

Concrete slab calculator

Path, patio, shed base or driveway: how much concrete you need, as bags or ready-mix, with the crushed-rock base.

Try itConcrete slab: enter your own sizes
m
Type metres, for example 3.5.
m
The shorter side.
mm
100 mm is a common starting point for paths and patios. Driveways and sheds need a design for the load; check with your council or an engineer.
Yield per bag is about the same mix in every size, so the bag count changes but the volume does not. Check the yield on your bag.
%
Covers spills and uneven ground. You can change it.
Mesh is for slabs designed to carry loads. Ask for the design if you are unsure.
You need
104 bags
or 1.0 m³ ready-mix

Shopping list

ItemBuyNote
Concrete mix, 20 kg bags104 bags0.00909 m³ per 20 kg bag (110 × 20 kg bags per m³, scaled by weight)
Crushed rock base (50 mm compacted, if used)1.08 t0.45 m³ compacted
  • Bag yields differ between brands (Boral lists 108 bags of 20 kg per m³, Cement Australia 110). Check the yield on your own bag.
How this was worked out
  1. Area: length × width
    3 × 3 = 9 m²
  2. Volume: area × thickness ÷ 1000
    9.00 × 100 ÷ 1000 = 0.9 m³
  3. With waste: volume × (1 + waste)
    0.900 × 1.05 = 0.95 m³
  4. Bags (20 kg): volume with waste ÷ yield per bag, rounded up
    0.945 ÷ 0.00909 = 103.95 bags
  5. Ready-mix: volume with waste, rounded up to the order step
    0.945 → steps of 0.2 m³ = 1 m³
  6. Base: area × base depth ÷ 1000 × compacted density
    9.00 × 50 ÷ 1000 × 2.4 = 1.08 t

Concrete slab needed by size

Size (m)Main resultShopping list
2 × 247 bag47 bag Concrete mix, 20 kg bags; 0.48 t Crushed rock base (50 mm compacted, if used)
3 × 3104 bag104 bag Concrete mix, 20 kg bags; 1.08 t Crushed rock base (50 mm compacted, if used)
4 × 31.4 m³1.4 m³ Ready-mix concrete; 1.44 t Crushed rock base (50 mm compacted, if used)
5 × 42.2 m³2.2 m³ Ready-mix concrete; 2.4 t Crushed rock base (50 mm compacted, if used)
6 × 42.6 m³2.6 m³ Ready-mix concrete; 2.88 t Crushed rock base (50 mm compacted, if used)
10 × 55.4 m³5.4 m³ Ready-mix concrete; 6 t Crushed rock base (50 mm compacted, if used)

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Area: length × width
    3 × 3 = 9 m²
  2. Volume: area × thickness ÷ 1000
    9.00 × 100 ÷ 1000 = 0.9 m³
  3. With waste: volume × (1 + waste)
    0.900 × 1.05 = 0.95 m³
  4. Bags (20 kg): volume with waste ÷ yield per bag, rounded up
    0.945 ÷ 0.00909 = 103.95 bags
  5. Ready-mix: volume with waste, rounded up to the order step
    0.945 → steps of 0.2 m³ = 1 m³
  6. Base: area × base depth ÷ 1000 × compacted density
    9.00 × 50 ÷ 1000 × 2.4 = 1.08 t

What to enter

FieldUnitHelp
LengthmType metres, for example 3.5.
WidthmThe shorter side.
Thicknessmm100 mm is a common starting point for paths and patios. Driveways and sheds need a design for the load; check with your council or an engineer.
Bag sizechooseYield per bag is about the same mix in every size, so the bag count changes but the volume does not. Check the yield on your bag.
Extra for waste%Covers spills and uneven ground. You can change it.
Reinforcing meshchooseMesh is for slabs designed to carry loads. Ask for the design if you are unsure.

Before you buy

Frequently asked questions

How do I calculate concrete slab?

Path, patio, shed base or driveway: how much concrete you need, as bags or ready-mix, with the crushed-rock base. Enter your sizes in the calculator. It works out area (length × width) and the later steps, then rounds up to whole packs.

Where does the concrete bags per m3 20kg cement australia figure come from?

110 bags/m3. Cement Australia Concrete Mix product data sheet (PDS CM rev 3): 110 x 20 kg bags are required per cubic metre. Checked against its source on 2026-11-18.

Where does the concrete bags per m3 20kg boral figure come from?

108 bags/m3. Boral Concrete Mix product data sheet: 108 x 20 kg bags equate to one cubic metre of mixed concrete. Checked against its source on 2026-11-18.

Where does the concrete slab waste figure come from?

5 %. Cement Australia slab calculator page: calculation includes a 5% allowance for wastage and rounds bags up. Checked against its source on 2026-11-18.

Where does the concrete slab thickness path figure come from?

100 mm. common practice for paths and patios (Cement Australia how-to uses a 100 mm slab as its example), editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
concrete bags per m3 20kg cement australia110 bags/m3Verified 2026-11-18Cement Australia Concrete Mix product data sheet (PDS CM rev 3): 110 x 20 kg bags are required per cubic metre.
concrete bags per m3 20kg boral108 bags/m3Verified 2026-11-18Boral Concrete Mix product data sheet: 108 x 20 kg bags equate to one cubic metre of mixed concrete.
concrete bag yield 25kg0.01 m3Verified 2026-11-18Dricon (Firth) HandiCrete page: 25 kg bag yield 0.010 m3.
concrete bag yield 40kg0.016 m3Verified 2026-11-18Dricon (Firth) HandiCrete page: 40 kg bag yield 0.016 m3.
concrete slab waste5 %Verified 2026-11-18Cement Australia slab calculator page: calculation includes a 5% allowance for wastage and rounds bags up.
concrete slab thickness path100 mmEditable defaultcommon practice for paths and patios (Cement Australia how-to uses a 100 mm slab as its example), editable
concrete slab min thickness75 mmVerified 2026-11-18Cement Australia slab calculator page: minimum thickness for a non-load bearing slab would be 75 mm (consult a professional for loads).
concrete readymix order step0.2 m3Editable defaulttypical ready-mix ordering granularity, rule of thumb, editable; confirm with local plant
concrete readymix consider m31 m3Editable defaultRule of thumb: above about 1 m3 a ready-mix delivery is usually easier than mixing bags. Editable; ask your supplier about minimum orders and short-load fees.
concrete base depth50 mmVerified 2026-11-18Cement Australia how to lay a concrete slab: excavate an extra 5 cm and compact crusher dust or road base to 5 cm.
landscape density roadbase compacted2.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: road base/DGB/FCR 2.4 t/m3 (compacted figure).
concrete mesh effective length5.8 mVerified 2026-11-18InfraBuild ribbed square mesh page: SL72 and SL82 effective area 5.8 x 2.4 m.
concrete mesh effective width2.4 mVerified 2026-11-18InfraBuild ribbed square mesh page: SL72 and SL82 effective area 5.8 x 2.4 m.

Guides for this calculator

Related calculators