EnoughToGet CalculatorsGuides

Concrete & masonry

Bricks calculator

How many bricks for a wall, and how many 20 kg bags of mortar mix to lay them, for a single skin or double brick wall.

Try itBricks: enter your own sizes
m
Type metres, for example 6.5. Add up every wall for several walls.
m
m²
Doors and windows. Leave at 0 to keep a little extra for cuts.
Double brick has two leaves of brick, so it uses twice as many bricks for the same wall area.
%
Littlehampton Brick allows 3%. Other guides suggest 5 to 10% for walls with many cuts.
You need
719 bricks
14.4 m² of single skin wall

Shopping list

ItemBuyNote
Bricks719 bricks48.4 per m² per skin
Mortar mix, 20 kg bags40 bagsabout 440 L of mortar
  • Bricks per m² is worked out for 230 × 76 mm bricks with 10 mm joints (about 48.5 per m², Littlehampton Brick). Other brick sizes need other numbers: check your brick's data sheet.
  • Mortar: Cement Australia says a 20 kg bag of Mortar Mix lays about 20 bricks. Other calculators quote far fewer bags, so check your own mortar bag.
How this was worked out
  1. Wall area: length × height − openings
    6 × 2.4 − 0 = 14.4 m²
  2. Bricks per m²: 1 ÷ ((brick length + joint) × (brick height + joint))
    1 ÷ (0.24 × 0.086) = 48.45 bricks/m²
  3. Bricks needed: area × bricks per m² × skins × (1 + waste), rounded up
    14.40 × 48.45 × 1 × 1.03 = 718.6 bricks
  4. Mortar mix: bricks × (1 + mortar waste) ÷ bricks per bag, rounded up
    719 × 1.10 ÷ 20 = 39.55 bags (20 kg)

Bricks needed by size

Wall (m, length × height)Main resultShopping list
4 × 1.8360 brick360 brick Bricks; 20 bag Mortar mix, 20 kg bags
6 × 2.4719 brick719 brick Bricks; 40 bag Mortar mix, 20 kg bags
8 × 2.4959 brick959 brick Bricks; 53 bag Mortar mix, 20 kg bags
10 × 1.2599 brick599 brick Bricks; 33 bag Mortar mix, 20 kg bags
12 × 2.71,617 brick1,617 brick Bricks; 89 bag Mortar mix, 20 kg bags

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Wall area: length × height − openings
    6 × 2.4 − 0 = 14.4 m²
  2. Bricks per m²: 1 ÷ ((brick length + joint) × (brick height + joint))
    1 ÷ (0.24 × 0.086) = 48.45 bricks/m²
  3. Bricks needed: area × bricks per m² × skins × (1 + waste), rounded up
    14.40 × 48.45 × 1 × 1.03 = 718.6 bricks
  4. Mortar mix: bricks × (1 + mortar waste) ÷ bricks per bag, rounded up
    719 × 1.10 ÷ 20 = 39.55 bags (20 kg)

What to enter

FieldUnitHelp
Wall lengthmType metres, for example 6.5. Add up every wall for several walls.
Wall heightm
Openings to deductm²Doors and windows. Leave at 0 to keep a little extra for cuts.
Wall typechooseDouble brick has two leaves of brick, so it uses twice as many bricks for the same wall area.
Extra for cuts and breakage%Littlehampton Brick allows 3%. Other guides suggest 5 to 10% for walls with many cuts.

Before you buy

Frequently asked questions

How do I calculate bricks?

How many bricks for a wall, and how many 20 kg bags of mortar mix to lay them, for a single skin or double brick wall. Enter your sizes in the calculator. It works out wall area (length × height − openings) and the later steps, then rounds up to whole packs.

Where does the brick work length figure come from?

230 mm. Littlehampton Brick: standard Australian clay brick work size 230 x 110 x 76 mm. Checked against its source on 2026-11-18.

Where does the brick work height figure come from?

76 mm. Littlehampton Brick: standard Australian clay brick work size 230 x 110 x 76 mm. Checked against its source on 2026-11-18.

Where does the brick joint figure come from?

10 mm. Littlehampton Brick: bricks per square metre are given for 10 mm mortar joints. Checked against its source on 2026-11-18.

Where does the brick per m2 check figure come from?

48.5 bricks/m2. Littlehampton Brick: 48.5 bricks per square metre including mortar for 230 x 76 mm bricks (the tool works this out from the size and joint). Checked against its source on 2026-11-18.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
brick work length230 mmVerified 2026-11-18Littlehampton Brick: standard Australian clay brick work size 230 x 110 x 76 mm.
brick work height76 mmVerified 2026-11-18Littlehampton Brick: standard Australian clay brick work size 230 x 110 x 76 mm.
brick joint10 mmVerified 2026-11-18Littlehampton Brick: bricks per square metre are given for 10 mm mortar joints.
brick per m2 check48.5 bricks/m2Verified 2026-11-18Littlehampton Brick: 48.5 bricks per square metre including mortar for 230 x 76 mm bricks (the tool works this out from the size and joint).
brick waste3 %Verified 2026-11-18Littlehampton Brick: 50 bricks per square metre once 3% wastage is added. Other sources suggest 5 to 10% for cuts and breakage: change it if your job has many cuts.
mortar bricks per 20kg bag20 bricks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 20 house bricks at a 10 mm joint.
mortar litres per 20kg bag11 L/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag yields about 11 litres of mortar.
mortar waste10 %Editable defaultEditable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb.

Related calculators