Roofing & cladding
Roofing sheets calculator
Metal roof sheets: how many sheets of Custom Orb, Trimdek or Klip-Lok, how long they must be for the pitch, screws and ridge capping.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Custom Orb (corrugated) sheets, 4.82 m long | 30 sheets | 762 mm cover; order the length your supplier can cut (sheets can be supplied long) |
| Roofing screws | 506 screws | 5 per m² at 900 mm supports (Lysaght Table 3.8) |
| Ridge capping, 2400 mm lengths | 5 lengths | laps and hip ends not counted |
- Flashings, gutters, end laps and fixing detail depend on your roof and wind region: follow the Lysaght manual.
How this was worked out
- Pitch factor:
1 ÷ cos(pitch)
1 ÷ cos(22.5°) = 1.08 × - Sheet length (slope):
(run + overhang) × pitch factor
(4 + 0.45) × 1.082 = 4.82 m - Sheets per plane:
length ÷ cover width, rounded up
10000 ÷ 762 = 14 sheets - Sheets:
planes × sheets per plane × (1 + waste), rounded up
2 × 14 × 1.05 = 29.4 sheets - Roof area:
planes × length × slope length
2 × 10 × 4.82 = 96.33 m² - Screws:
area × screws per m² × (1 + waste)
96.3 × 5 × 1.05 = 506 screws
Roofing sheets needed by size
| Roof plane (m, length × run) | Main result | Shopping list |
|---|---|---|
| 6 × 3 | 17 sheet | 17 sheet Custom Orb (corrugated) sheets, 3.73 m long; 236 screw Roofing screws; 3 length Ridge capping, 2400 mm lengths |
| 8 × 3.5 | 24 sheet | 24 sheet Custom Orb (corrugated) sheets, 4.28 m long; 360 screw Roofing screws; 4 length Ridge capping, 2400 mm lengths |
| 10 × 4 | 30 sheet | 30 sheet Custom Orb (corrugated) sheets, 4.82 m long; 506 screw Roofing screws; 5 length Ridge capping, 2400 mm lengths |
| 12 × 4.5 | 34 sheet | 34 sheet Custom Orb (corrugated) sheets, 5.36 m long; 676 screw Roofing screws; 5 length Ridge capping, 2400 mm lengths |
| 15 × 5 | 42 sheet | 42 sheet Custom Orb (corrugated) sheets, 5.90 m long; 930 screw Roofing screws; 7 length Ridge capping, 2400 mm lengths |
Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.
How it is calculated
- Pitch factor:
1 ÷ cos(pitch)
1 ÷ cos(22.5°) = 1.08 × - Sheet length (slope):
(run + overhang) × pitch factor
(4 + 0.45) × 1.082 = 4.82 m - Sheets per plane:
length ÷ cover width, rounded up
10000 ÷ 762 = 14 sheets - Sheets:
planes × sheets per plane × (1 + waste), rounded up
2 × 14 × 1.05 = 29.4 sheets - Roof area:
planes × length × slope length
2 × 10 × 4.82 = 96.33 m² - Screws:
area × screws per m² × (1 + waste)
96.3 × 5 × 1.05 = 506 screws
What to enter
| Field | Unit | Help |
|---|---|---|
| Roof length along the eaves | m | The length of one roof plane, eaves to eaves. |
| Horizontal run, eaves to ridge | m | Measured flat on the plan, not along the slope. |
| Eaves overhang | m | The part of the roof past the wall, measured flat. |
| Roof pitch | ° | The angle of the roof in degrees. |
| Roof shape | choose | |
| Sheet profile | choose | Cover width is the width one sheet covers once overlapped, from Lysaght. |
| Purlin or batten spacing | choose | Only used for the screw count. |
| Extra for cuts | % |
Before you buy
- Flashings, gutters, end laps and fixing detail depend on your roof and wind region: follow the Lysaght manual.
Frequently asked questions
How do I calculate roofing sheets?
Metal roof sheets: how many sheets of Custom Orb, Trimdek or Klip-Lok, how long they must be for the pitch, screws and ridge capping. Enter your sizes in the calculator. It works out pitch factor (1 ÷ cos(pitch)) and the later steps, then rounds up to whole packs.
Where does the roof cover custom orb figure come from?
762 mm. Lysaght Custom Orb (corrugated) profile: cover width 762 mm. Checked against its source on 2026-11-18.
Where does the roof cover trimdek figure come from?
762 mm. Lysaght Roofing and Walling Installation Manual: Trimdek cover width 762 mm. Checked against its source on 2026-11-18.
Where does the roof cover klip lok 406 figure come from?
406 mm. Lysaght Roofing and Walling Installation Manual: Klip-Lok 406 cover width 406 mm. Checked against its source on 2026-11-18.
Where does the roof cover klip lok 700 figure come from?
700 mm. Lysaght Roofing and Walling Installation Manual: Klip-Lok 700 cover width 700 mm. Checked against its source on 2026-11-18.
Does this calculator work for New Zealand?
Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.
Does it show prices?
No. It gives quantities and a shopping list. Ask your supplier for prices.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.
Related calculators
- Concrete slabPath, patio, shed base or driveway: how much concrete you need, as bags or ready-mix, with the crushed-rock…
- Concrete for postsHow many 20 kg bags of Post Mix concrete to set posts: the hole is twice the post width and a third of the…
- Reo meshReinforcing mesh for a slab: how many sheets of SL62, SL72 or SL82 mesh, and how many bar chairs hold it off…
- BricksHow many bricks for a wall, and how many 20 kg bags of mortar mix to lay them, for a single skin or double…
- Concrete blocksHow many besser blocks for a wall, with mortar and core-fill concrete for reinforced walls.
- MortarHow many 20 kg bags of mortar mix for 1000 bricks or any number of bricks or blocks.
- PaintHow many litres of paint for a room, and which cans to buy, with doors, windows and the ceiling taken into…
- PlasterboardWalls and ceilings: how many plasterboard sheets, screws and bags of jointing compound, with cornice length.
- TilesFloor or wall tiles: how many tiles, how many boxes, bags of adhesive and grout, with waste for the layout.
- FlooringLaminate, vinyl plank or timber flooring: how many boxes to buy for a room, with waste for the layout and…
- PaversPatio or path: how many pavers, how much road base and how much bedding sand.
- Soil, gravel and mulchGarden beds, paths and driveways: cubic metres and tonnes of soil, sand, gravel, road base or mulch, with…
- TurfLawn turf rolls for a lawn, and the topsoil to lay them on, in square metres and cubic metres.
- Retaining wallConcrete sleeper retaining wall: how many sleepers and posts, and the drainage gravel behind it.
- FenceTimber paling or steel sheet fence: posts, rails, palings or panels, and bags of concrete for the post holes.
- DeckingTimber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at…
- Weatherboard claddingFibre-cement weatherboards (Linea, Stria, HardiePlank): how many boards and packs for a wall, with the…
- Wall framingTimber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres.
- Insulation battsWall or ceiling batts: how many packs of insulation batts to buy for an area, from the pack coverage.