EnoughToGet CalculatorsGuides

Fencing & decking

Fence calculator

Timber paling or steel sheet fence: posts, rails, palings or panels, and bags of concrete for the post holes.

Try itFence: enter your own sizes
m
The total length of the fence line, gates included.
mm
Up to 1800 mm. Check your council for height limits near boundaries.
Steel panels follow the Lysaght fence installation guide.
mm
Timber shrinks, so many builders leave a small gap. 0 means edge to edge.
You need
10 posts
for 20 m of fence

Shopping list

ItemBuyNote
Posts10 postsat most 2.4 m apart; about 600 mm in the ground
Rails, 2.4 m lengths27 rails3 per bay at 1800 mm high
Palings, 100 mm wide200 palingsedge to edge
Post Mix concrete, 20 kg bags (post holes)20 bags2 bags a hole, for a hole 2 × the post width
  • The 2-bag figure is Bunnings Post Mix advice for a hole 2 × the post width. A wider or deeper hole needs more bags.
How this was worked out
  1. Panels (bays): length ÷ post spacing, rounded up
    20000 ÷ 2400 = 9 bays
  2. Posts: bays + 1
    9 + 1 = 10 posts
  3. Rails: bays × rails per bay
    9 × 3 = 27 rails
  4. Palings: length ÷ (paling width + gap), rounded up
    20000 ÷ (100 + 0) = 200 palings
  5. Concrete for posts: posts × bags per hole
    10 × 2 = 20 bags

Fence needed by size

Fence length (m)Main resultShopping list
64 post4 post Posts; 9 rail Rails, 2.4 m lengths; 60 paling Palings, 100 mm wide
126 post6 post Posts; 15 rail Rails, 2.4 m lengths; 120 paling Palings, 100 mm wide
2010 post10 post Posts; 27 rail Rails, 2.4 m lengths; 200 paling Palings, 100 mm wide
3014 post14 post Posts; 39 rail Rails, 2.4 m lengths; 300 paling Palings, 100 mm wide
5022 post22 post Posts; 63 rail Rails, 2.4 m lengths; 500 paling Palings, 100 mm wide

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Panels (bays): length ÷ post spacing, rounded up
    20000 ÷ 2400 = 9 bays
  2. Posts: bays + 1
    9 + 1 = 10 posts
  3. Rails: bays × rails per bay
    9 × 3 = 27 rails
  4. Palings: length ÷ (paling width + gap), rounded up
    20000 ÷ (100 + 0) = 200 palings
  5. Concrete for posts: posts × bags per hole
    10 × 2 = 20 bags

What to enter

FieldUnitHelp
Fence lengthmThe total length of the fence line, gates included.
Fence heightmmUp to 1800 mm. Check your council for height limits near boundaries.
StylechooseSteel panels follow the Lysaght fence installation guide.
Paling width (timber)choose
Gap between palings (timber)mmTimber shrinks, so many builders leave a small gap. 0 means edge to edge.

Before you buy

Frequently asked questions

How do I calculate fence?

Timber paling or steel sheet fence: posts, rails, palings or panels, and bags of concrete for the post holes. Enter your sizes in the calculator. It works out panels (bays) (length ÷ post spacing, rounded up) and the later steps, then rounds up to whole packs.

Where does the fence timber post spacing max figure come from?

2.4 m. Timber Queensland TDS 20 Residential Timber Fences: rails 100 x 38 mm allow 2400 mm max post spacing (2100 mm with 75 x 38 mm rails). Checked against its source on 2026-11-18.

Where does the fence timber rails up to 1200 figure come from?

2 rails. Timber Queensland TDS 20 Residential Timber Fences: two rails for paling fences up to 1200 mm high. Checked against its source on 2026-11-18.

Where does the fence timber rails over 1200 figure come from?

3 rails. Timber Queensland TDS 20 Residential Timber Fences: fences over 1200 mm and up to 1800 mm high require three rails. Checked against its source on 2026-11-18.

Where does the fence paling width 100 figure come from?

100 mm. Timber Queensland TDS 20 Residential Timber Fences: commonly used paling sizes are 100 x 15 mm and 75 x 15 mm. Checked against its source on 2026-11-18.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
fence timber post spacing max2.4 mVerified 2026-11-18Timber Queensland TDS 20 Residential Timber Fences: rails 100 x 38 mm allow 2400 mm max post spacing (2100 mm with 75 x 38 mm rails).
fence timber rails up to 12002 railsVerified 2026-11-18Timber Queensland TDS 20 Residential Timber Fences: two rails for paling fences up to 1200 mm high.
fence timber rails over 12003 railsVerified 2026-11-18Timber Queensland TDS 20 Residential Timber Fences: fences over 1200 mm and up to 1800 mm high require three rails.
fence paling width 100100 mmVerified 2026-11-18Timber Queensland TDS 20 Residential Timber Fences: commonly used paling sizes are 100 x 15 mm and 75 x 15 mm.
fence paling width 7575 mmVerified 2026-11-18Timber Queensland TDS 20 Residential Timber Fences: commonly used paling sizes are 100 x 15 mm and 75 x 15 mm.
fence paling gap default0 mmEditable defaultPalings are laid edge to edge by default. Timber shrinks, so many builders leave a small gap; type your own gap.
fence steel panel width 2sheet1,582 mmVerified 2026-11-18Lysaght fence and gate installation guide (non-cyclonic) Table 6.1: panel width 1582 mm with 2 infill sheets.
fence steel panel width 3sheet2,350 mmVerified 2026-11-18Lysaght fence and gate installation guide (non-cyclonic) Table 6.1: panel width 2350 mm with 3 infill sheets (post spacing = panel width).
fence steel panel width 4sheet3,100 mmVerified 2026-11-18Lysaght fence and gate installation guide (non-cyclonic) Table 6.1: panel width 3100 mm with 4 infill sheets.
concrete post bags per hole2 bags (20 kg)Verified 2026-11-18Bunnings Easy Mix Post Mix technical data sheet: use approximately two 20 kg bags per post hole.
concrete post hole width factor2 x post widthVerified 2026-11-18Bunnings Easy Mix Post Mix technical data sheet: hole width = 2 x width or diameter of the post.
fence timber post depth600 mmVerified 2026-11-18Timber Queensland TDS 20 Residential Timber Fences: posts about 600 mm deep for fences 1200-1800 mm high (450 mm up to 1200 mm).

Guides for this calculator

Related calculators