EnoughToGet CalculatorsGuides

Landscaping

Turf calculator

Lawn turf rolls for a lawn, and the topsoil to lay them on, in square metres and cubic metres.

Try itTurf: enter your own sizes
m
Type metres, for example 8.5.
m
mm
Leave at 0 if you are laying onto good soil already.
%
Curved edges and garden beds waste more.
You need
42 rolls
40.0 m² of lawn

Shopping list

ItemBuyNote
Turf rolls42 rolls1 m² a roll
Topsoil, 100 mm deep4 m³about 5.60 t
  • Most Australian turf rolls cover 1 m² (Musturf, AG Turf Supplies), but check with your grower: some sell slabs or different roll sizes. Lay turf the day it is delivered.
How this was worked out
  1. Lawn area: length × width
    8 × 5 = 40 m²
  2. Rolls: area × (1 + waste) ÷ roll area, rounded up
    40.00 × 1.05 ÷ 1 = 42 rolls
  3. Topsoil: area × depth ÷ 1000
    40.00 × 100 ÷ 1000 = 4 m³

Turf needed by size

Lawn (m)Main resultShopping list
4 × 313 roll13 roll Turf rolls; 1.2 m³ Topsoil, 100 mm deep
6 × 426 roll26 roll Turf rolls; 2.4 m³ Topsoil, 100 mm deep
8 × 542 roll42 roll Turf rolls; 4 m³ Topsoil, 100 mm deep
10 × 663 roll63 roll Turf rolls; 6 m³ Topsoil, 100 mm deep
10 × 10105 roll105 roll Turf rolls; 10 m³ Topsoil, 100 mm deep

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Lawn area: length × width
    8 × 5 = 40 m²
  2. Rolls: area × (1 + waste) ÷ roll area, rounded up
    40.00 × 1.05 ÷ 1 = 42 rolls
  3. Topsoil: area × depth ÷ 1000
    40.00 × 100 ÷ 1000 = 4 m³

What to enter

FieldUnitHelp
Lawn lengthmType metres, for example 8.5.
Lawn widthm
Topsoil depthmmLeave at 0 if you are laying onto good soil already.
Extra for cuts and edges%Curved edges and garden beds waste more.

Before you buy

Frequently asked questions

How do I calculate turf?

Lawn turf rolls for a lawn, and the topsoil to lay them on, in square metres and cubic metres. Enter your sizes in the calculator. It works out lawn area (length × width) and the later steps, then rounds up to whole packs.

Where does the turf roll area figure come from?

1 m2/roll. Musturf and AG Turf Supplies: most turf rolls in Australia cover 1 square metre. Checked against its source on 2026-11-18.

Where does the turf waste figure come from?

5 %. Editable allowance for cuts and edges. No Australian grower figure found: a common turfing rule of thumb. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the landscape topsoil lawn depth figure come from?

100 mm. typical topsoil depth for a new lawn, rule of thumb, editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the landscape density topsoil figure come from?

1.4 t/m3. Australian Native Landscapes product weights FAQ: topsoil 1.4 t/m3. Checked against its source on 2026-11-18.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
turf roll area1 m2/rollVerified 2026-11-18Musturf and AG Turf Supplies: most turf rolls in Australia cover 1 square metre.
turf waste5 %Editable defaultEditable allowance for cuts and edges. No Australian grower figure found: a common turfing rule of thumb.
landscape topsoil lawn depth100 mmEditable defaulttypical topsoil depth for a new lawn, rule of thumb, editable
landscape density topsoil1.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: topsoil 1.4 t/m3.

Related calculators