EnoughToGet CalculatorsGuides

Fencing & decking

Decking calculator

Timber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at the right spacing.

Try itDecking: enter your own sizes
m
Boards run along this length. Joists run across it.
m
Sets the joist spacing and the gap between boards.
Cover width of the board you will buy.
m
Boards meet over a joist. Use the length your supplier stocks.
%
Angled or patterned decks waste more.
You need
86 boards
17.3 m² deck, 11 joists

Shopping list

ItemBuyNote
Decking boards, 90 mm wide, 2.4 m long86 boards39 rows of 2.0 boards, 3 mm gaps
Joists, 3.6 m long11 joistsat most 500 mm apart
Screws or nails (two per board per joist)944 fixingscheck your board maker's fixing advice
  • Gap between boards: 3 mm for hardwood (ATFA). Use at least 5 mm close to the ground or over a slab. Joist spacing: no more than 500 mm for Hardwood, 19 mm (WoodSolutions).
  • Bearers, posts, footings and deck height need a design to AS 1684. This calculator counts the deck surface only. Check with your council whether you need approval.
How this was worked out
  1. Rows of boards: width ÷ (board width + gap), rounded up
    3600 ÷ (90 + 3) = 39 rows
  2. Boards per row: length ÷ board length
    4.8 ÷ 2.4 = 2 boards
  3. Boards: rows × boards per row × (1 + waste), rounded up
    39 × 2.00 × 1.10 = 85.8 boards
  4. Joists: length ÷ joist spacing, rounded up, + 1
    4800 ÷ 500 + 1 = 11 joists
  5. Fixings: rows × joists × fixings per crossing × (1 + waste)
    39 × 11 × 2 × 1.10 = 943.8 fixings

Decking needed by size

Deck (m)Main resultShopping list
3 × 346 board46 board Decking boards, 90 mm wide, 2.4 m long; 7 joist Joists, 3 m long; 509 fixing Screws or nails (two per board per joist)
3.6 × 355 board55 board Decking boards, 90 mm wide, 2.4 m long; 9 joist Joists, 3 m long; 654 fixing Screws or nails (two per board per joist)
4.8 × 3.686 board86 board Decking boards, 90 mm wide, 2.4 m long; 11 joist Joists, 3.6 m long; 944 fixing Screws or nails (two per board per joist)
6 × 4121 board121 board Decking boards, 90 mm wide, 2.4 m long; 13 joist Joists, 4 m long; 1,259 fixing Screws or nails (two per board per joist)
7.2 × 4.8172 board172 board Decking boards, 90 mm wide, 2.4 m long; 16 joist Joists, 4.8 m long; 1,831 fixing Screws or nails (two per board per joist)

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Rows of boards: width ÷ (board width + gap), rounded up
    3600 ÷ (90 + 3) = 39 rows
  2. Boards per row: length ÷ board length
    4.8 ÷ 2.4 = 2 boards
  3. Boards: rows × boards per row × (1 + waste), rounded up
    39 × 2.00 × 1.10 = 85.8 boards
  4. Joists: length ÷ joist spacing, rounded up, + 1
    4800 ÷ 500 + 1 = 11 joists
  5. Fixings: rows × joists × fixings per crossing × (1 + waste)
    39 × 11 × 2 × 1.10 = 943.8 fixings

What to enter

FieldUnitHelp
Deck length (board direction)mBoards run along this length. Joists run across it.
Deck widthm
Decking type and thicknesschooseSets the joist spacing and the gap between boards.
Board widthchooseCover width of the board you will buy.
Board length you will buymBoards meet over a joist. Use the length your supplier stocks.
Extra for cuts%Angled or patterned decks waste more.

Before you buy

Frequently asked questions

How do I calculate decking?

Timber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at the right spacing. Enter your sizes in the calculator. It works out rows of boards (width ÷ (board width + gap), rounded up) and the later steps, then rounds up to whole packs.

Where does the deck gap hardwood figure come from?

3 mm. ATFA Residential Timber Decks guide: 3 mm gap for hardwood or cypress boards up to 90 mm wide, not close to the ground. Checked against its source on 2026-11-18.

Where does the deck gap softwood figure come from?

5 mm. ATFA Residential Timber Decks guide: 5 mm gap for softwood boards (and 130 mm hardwood). Use at least 5 mm close to the ground or over a slab. Checked against its source on 2026-11-18.

Where does the deck joist spacing hardwood 19 figure come from?

500 mm. WoodSolutions TDG 21 Table 2: maximum joist spacing 500 mm for 19 mm hardwood decking (AS 2796). Checked against its source on 2026-11-18.

Where does the deck joist spacing cypress 19 figure come from?

400 mm. WoodSolutions TDG 21 Table 2: maximum joist spacing 400 mm for 19 mm cypress decking (AS 1810). Checked against its source on 2026-11-18.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
deck gap hardwood3 mmVerified 2026-11-18ATFA Residential Timber Decks guide: 3 mm gap for hardwood or cypress boards up to 90 mm wide, not close to the ground.
deck gap softwood5 mmVerified 2026-11-18ATFA Residential Timber Decks guide: 5 mm gap for softwood boards (and 130 mm hardwood). Use at least 5 mm close to the ground or over a slab.
deck joist spacing hardwood 19500 mmVerified 2026-11-18WoodSolutions TDG 21 Table 2: maximum joist spacing 500 mm for 19 mm hardwood decking (AS 2796).
deck joist spacing cypress 19400 mmVerified 2026-11-18WoodSolutions TDG 21 Table 2: maximum joist spacing 400 mm for 19 mm cypress decking (AS 1810).
deck joist spacing cypress 21450 mmVerified 2026-11-18WoodSolutions TDG 21 Table 2: maximum joist spacing 450 mm for 21 mm cypress decking.
deck joist spacing pine 19400 mmVerified 2026-11-18WoodSolutions TDG 21 Table 2: maximum joist spacing 400 mm for 19 mm treated softwood decking (AS 4785).
deck joist spacing pine 22450 mmVerified 2026-11-18WoodSolutions TDG 21 Table 2: maximum joist spacing 450 mm for 22 mm treated softwood decking.
deck fixings per joist2 fixingsVerified 2026-11-18WoodSolutions TDG 21 and ATFA: at least two nails or screws per board at each joist crossing.
deck waste10 %Editable defaultEditable allowance for cuts and defects. None of the Australian timber guides read gives a figure: a common decking rule of thumb.

Related calculators