EnoughToGet CalculatorsGuides

Landscaping

Pavers calculator

Patio or path: how many pavers, how much road base and how much bedding sand.

Try itPavers: enter your own sizes
m
Type metres, for example 4.5.
m
The shorter side.
Pavers per square metre include the joints, from Adbri Masonry paving data.
%
Patterns and curves need more.
You need
79 pavers
12.0 m² at 6.25 per m²

Shopping list

ItemBuyNote
Pavers, 400 × 400 mm79 pavers6.25 per m² including joints
Road base (75 mm compacted depth)2.16 t0.90 m³
Bedding sand (25 mm)0.44 t0.30 m³
  • Allow a fall of at least 2% for drainage, and dig about 170 mm deep for a patio base, bedding sand and the paver.
How this was worked out
  1. Area: length × width
    4 × 3 = 12 m²
  2. Pavers needed: area × pavers per m²
    12.00 × 6.25 = 75 pavers
  3. With waste: pavers × (1 + waste), rounded up
    75.0 × 1.05 = 78.75 pavers
  4. Road base: area × depth ÷ 1000 × density
    12.00 × 75 mm × 2.4 t/m³ = 2.16 t
  5. Bedding sand: area × depth ÷ 1000 × density
    12.00 × 25 mm × 1.45 t/m³ = 0.44 t

Pavers needed by size

Size (m)Main resultShopping list
2 × 227 paver27 paver Pavers, 400 × 400 mm; 0.72 t Road base (75 mm compacted depth); 0.15 t Bedding sand (25 mm)
3 × 360 paver60 paver Pavers, 400 × 400 mm; 1.62 t Road base (75 mm compacted depth); 0.33 t Bedding sand (25 mm)
4 × 379 paver79 paver Pavers, 400 × 400 mm; 2.16 t Road base (75 mm compacted depth); 0.44 t Bedding sand (25 mm)
5 × 4132 paver132 paver Pavers, 400 × 400 mm; 3.6 t Road base (75 mm compacted depth); 0.73 t Bedding sand (25 mm)
6 × 5197 paver197 paver Pavers, 400 × 400 mm; 5.4 t Road base (75 mm compacted depth); 1.09 t Bedding sand (25 mm)
10 × 5329 paver329 paver Pavers, 400 × 400 mm; 9 t Road base (75 mm compacted depth); 1.81 t Bedding sand (25 mm)

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Area: length × width
    4 × 3 = 12 m²
  2. Pavers needed: area × pavers per m²
    12.00 × 6.25 = 75 pavers
  3. With waste: pavers × (1 + waste), rounded up
    75.0 × 1.05 = 78.75 pavers
  4. Road base: area × depth ÷ 1000 × density
    12.00 × 75 mm × 2.4 t/m³ = 2.16 t
  5. Bedding sand: area × depth ÷ 1000 × density
    12.00 × 25 mm × 1.45 t/m³ = 0.44 t

What to enter

FieldUnitHelp
LengthmType metres, for example 4.5.
WidthmThe shorter side.
Paver sizechoosePavers per square metre include the joints, from Adbri Masonry paving data.
Extra for cuts and breakage%Patterns and curves need more.

Before you buy

Frequently asked questions

How do I calculate pavers?

Patio or path: how many pavers, how much road base and how much bedding sand. Enter your sizes in the calculator. It works out area (length × width) and the later steps, then rounds up to whole packs.

Where does the paver per m2 400x400 figure come from?

6.25 pavers/m2. Adbri Masonry paving brochure (VIC): Euro Stone 400 x 400 x 40 mm, 6.25 units per m2. Checked against its source on 2026-11-18.

Where does the paver per m2 600x400 figure come from?

4.16 pavers/m2. Adbri Masonry paving brochure (VIC): Euro Stone 600 x 400 x 40 mm, 4.16 units per m2. Checked against its source on 2026-11-18.

Where does the paver per m2 400x200 figure come from?

12.5 pavers/m2. Adbri Masonry paving brochure (VIC): Havenslab 400 x 200 x 40 mm, 12.50 units per m2. Checked against its source on 2026-11-18.

Where does the paver per m2 200x100 figure come from?

50 pavers/m2. Adbri Masonry paving brochure (VIC): Havenbrick 200 x 100 x 40 mm, 50 units per m2. Checked against its source on 2026-11-18.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
paver per m2 400x4006.25 pavers/m2Verified 2026-11-18Adbri Masonry paving brochure (VIC): Euro Stone 400 x 400 x 40 mm, 6.25 units per m2.
paver per m2 600x4004.16 pavers/m2Verified 2026-11-18Adbri Masonry paving brochure (VIC): Euro Stone 600 x 400 x 40 mm, 4.16 units per m2.
paver per m2 400x20012.5 pavers/m2Verified 2026-11-18Adbri Masonry paving brochure (VIC): Havenslab 400 x 200 x 40 mm, 12.50 units per m2.
paver per m2 200x10050 pavers/m2Verified 2026-11-18Adbri Masonry paving brochure (VIC): Havenbrick 200 x 100 x 40 mm, 50 units per m2.
paver waste5 %Verified 2026-11-18Adbri Masonry Ultimate Outdoor Planning Guide: with the Concrete Masonry Association of Australia, order an extra 5% for cuts and breakages.
paver roadbase depth75 mmVerified 2026-11-18Adbri Masonry paving brochure (VIC) flexible installation: compacted road base min 75 mm (also 'enough for 75 mm compacted depth' in its how-to checklist).
paver bedding sand depth25 mmVerified 2026-11-18Adbri Masonry paving brochure (VIC) flexible installation cross section: bedding sand nominal 25 mm (its how-to checklist allows sand for 30 mm).
paver excavation depth170 mmVerified 2026-11-18Adbri Masonry paving brochure (VIC) how to lay pavers, step 1: excavate approx. 170 mm deep.
paver min fall2 %Verified 2026-11-18Adbri Masonry paving brochure (VIC): minimum gradient 2% (100 mm per 5 lineal metres).
landscape density roadbase compacted2.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: road base/DGB/FCR 2.4 t/m3 (compacted figure).
landscape density sand brickies1.45 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: brickies sand 1.45 t/m3.

Guides for this calculator

Related calculators