EnoughToGet CalculatorsGuides

Framing & insulation

Insulation batts calculator

Wall or ceiling batts: how many packs of insulation batts to buy for an area, from the pack coverage.

Try itInsulation batts: enter your own sizes
m
The length of wall or ceiling to insulate.
m
A wall's height, or a ceiling's other side.
m²
Doors, windows and anything else left out.
Pack coverage is the Bradford Gold figure on the retailer page. Check the pack you buy.
%
You need
3 packs
28.8 m² of wall batts r2.0, 430 × 1160 mm

Shopping list

ItemBuyNote
Wall batts R2.0, 430 × 1160 mm, packs3 packs11 m² a pack
  • The R-value you need depends on your climate zone and on which part of the building: ceiling, wall or floor. Check the National Construction Code (ABCB) or ask your designer. This calculator does not choose it.
How this was worked out
  1. Area: length × width − area not insulated
    12 × 2.4 − 0 = 28.8 m²
  2. Packs: area × (1 + waste) ÷ coverage per pack, rounded up
    28.80 × 1.05 ÷ 11 = 2.75 packs

Insulation batts needed by size

Area (m, length × width)Main resultShopping list
6 × 2.42 pack2 pack Wall batts R2.0, 430 × 1160 mm, packs
10 × 2.43 pack3 pack Wall batts R2.0, 430 × 1160 mm, packs
15 × 2.44 pack4 pack Wall batts R2.0, 430 × 1160 mm, packs
20 × 2.45 pack5 pack Wall batts R2.0, 430 × 1160 mm, packs
30 × 2.47 pack7 pack Wall batts R2.0, 430 × 1160 mm, packs

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Area: length × width − area not insulated
    12 × 2.4 − 0 = 28.8 m²
  2. Packs: area × (1 + waste) ÷ coverage per pack, rounded up
    28.80 × 1.05 ÷ 11 = 2.75 packs

What to enter

FieldUnitHelp
LengthmThe length of wall or ceiling to insulate.
Width or heightmA wall's height, or a ceiling's other side.
Area not insulatedm²Doors, windows and anything else left out.
BattchoosePack coverage is the Bradford Gold figure on the retailer page. Check the pack you buy.
Extra for cuts%

Before you buy

Frequently asked questions

How do I calculate insulation batts?

Wall or ceiling batts: how many packs of insulation batts to buy for an area, from the pack coverage. Enter your sizes in the calculator. It works out area (length × width − area not insulated) and the later steps, then rounds up to whole packs.

Where does the insulation pack wall r2 430 figure come from?

11 m2/pack. Ambisol (Bradford Gold wall batts R2.0, 430 x 1160 mm): 11.0 m2 per pack. Checked against its source on 2026-11-18.

Where does the insulation pack wall r2 580 figure come from?

12.2 m2/pack. Bradford Gold wall batts R2.0, 580 x 1160 mm: 12.2 m2 per pack (retailer listing, second-hand figure). This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the insulation pack ceiling r25 figure come from?

10.8 m2/pack. Bradford Gold ceiling batts R2.5: 10.8 m2 per pack (retailer listing, second-hand figure). This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the insulation pack ceiling r35 figure come from?

8 m2/pack. Bradford Gold ceiling batts R3.5: 8.0 m2 per pack (retailer listing, second-hand figure). This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
insulation pack wall r2 43011 m2/packVerified 2026-11-18Ambisol (Bradford Gold wall batts R2.0, 430 x 1160 mm): 11.0 m2 per pack.
insulation pack wall r2 58012.2 m2/packEditable defaultBradford Gold wall batts R2.0, 580 x 1160 mm: 12.2 m2 per pack (retailer listing, second-hand figure).
insulation pack ceiling r2510.8 m2/packEditable defaultBradford Gold ceiling batts R2.5: 10.8 m2 per pack (retailer listing, second-hand figure).
insulation pack ceiling r358 m2/packEditable defaultBradford Gold ceiling batts R3.5: 8.0 m2 per pack (retailer listing, second-hand figure).
insulation pack ceiling r415 m2/packEditable defaultBradford Gold ceiling batts R4.1: 5.0 m2 per pack (retailer listing, second-hand figure).
insulation waste5 %Editable defaultEditable allowance for cuts. Only a calculator site (roofingcalculatorhq) gives a figure (5%): no manufacturer figure found.

Related calculators