Landscaping
Retaining wall calculator
Concrete sleeper retaining wall: how many sleepers and posts, and the drainage gravel behind it.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Concrete sleepers, 2400 mm | 16 sleepers | 4 courses of 4 |
| Steel posts, 1.40 m long | 5 posts | 600 mm in the ground |
| Drainage gravel behind the wall | 1.92 m³ | about 2.78 t |
- Retaining walls higher than about 0.6 m usually need an engineer's design or approval (RetWall). Rules differ by state and council: check yours before you buy.
- Post spacing here equals the sleeper length. RetWall quotes 1.2 m between posts for tall walls and up to 2.4 m for shorter ones, and the footing depth grows with the wall: the engineer sets spacing, steel size and footing depth. This count is for planning only.
How this was worked out
- Courses:
height ÷ sleeper height, rounded up
800 ÷ 200 = 4 courses - Sleepers per course:
length ÷ sleeper length, rounded up
8000 ÷ 2400 = 4 sleepers - Sleepers:
courses × sleepers per course
4 × 4 = 16 sleepers - Posts:
sleepers per course + 1
4 + 1 = 5 posts - Post length:
retained height + footing depth
0.8 + 0.6 = 1.4 m - Drainage gravel:
length × gravel width × height × density
8 × 0.3 × 0.8 × 1.45 = 2.78 t
Retaining wall needed by size
| Wall (m, length × height) | Main result | Shopping list |
|---|---|---|
| 4 × 0.6 | 6 sleeper | 6 sleeper Concrete sleepers, 2400 mm; 3 post Steel posts, 1.20 m long; 0.72 m³ Drainage gravel behind the wall |
| 6 × 0.8 | 12 sleeper | 12 sleeper Concrete sleepers, 2400 mm; 4 post Steel posts, 1.40 m long; 1.44 m³ Drainage gravel behind the wall |
| 8 × 0.8 | 16 sleeper | 16 sleeper Concrete sleepers, 2400 mm; 5 post Steel posts, 1.40 m long; 1.92 m³ Drainage gravel behind the wall |
| 10 × 1 | 25 sleeper | 25 sleeper Concrete sleepers, 2400 mm; 6 post Steel posts, 1.60 m long; 3 m³ Drainage gravel behind the wall |
| 12 × 1.2 | 30 sleeper | 30 sleeper Concrete sleepers, 2400 mm; 6 post Steel posts, 1.80 m long; 4.32 m³ Drainage gravel behind the wall |
Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.
How it is calculated
- Courses:
height ÷ sleeper height, rounded up
800 ÷ 200 = 4 courses - Sleepers per course:
length ÷ sleeper length, rounded up
8000 ÷ 2400 = 4 sleepers - Sleepers:
courses × sleepers per course
4 × 4 = 16 sleepers - Posts:
sleepers per course + 1
4 + 1 = 5 posts - Post length:
retained height + footing depth
0.8 + 0.6 = 1.4 m - Drainage gravel:
length × gravel width × height × density
8 × 0.3 × 0.8 × 1.45 = 2.78 t
What to enter
| Field | Unit | Help |
|---|---|---|
| Wall length | m | Type metres, for example 8.5. |
| Retained height | m | The height of soil the wall holds back, not including the footing. |
| Sleeper length | choose | Posts stand at each sleeper joint, so post spacing equals the sleeper length. Pick the length your supplier stocks. |
| Sleeper face height | mm | Read it from your sleeper. 200 mm is only a typical starting value. |
| Footing depth | mm | 600 mm is the RetWall figure for low walls. Taller walls need deeper footings from the engineer. |
Before you buy
- Retaining walls higher than about 0.6 m usually need an engineer's design or approval (RetWall). Rules differ by state and council: check yours before you buy.
- Post spacing here equals the sleeper length. RetWall quotes 1.2 m between posts for tall walls and up to 2.4 m for shorter ones, and the footing depth grows with the wall: the engineer sets spacing, steel size and footing depth. This count is for planning only.
Frequently asked questions
How do I calculate retaining wall?
Concrete sleeper retaining wall: how many sleepers and posts, and the drainage gravel behind it. Enter your sizes in the calculator. It works out courses (height ÷ sleeper height, rounded up) and the later steps, then rounds up to whole packs.
Where does the retaining sleeper length 1800 figure come from?
1,800 mm. Outwest Sleepers (Victorian supplier): concrete sleepers are supplied in 1800, 2000 and 2400 mm lengths. Checked against its source on 2026-11-18.
Where does the retaining sleeper length 2000 figure come from?
2,000 mm. Outwest Sleepers (Victorian supplier): concrete sleepers are supplied in 1800, 2000 and 2400 mm lengths. Checked against its source on 2026-11-18.
Where does the retaining sleeper length 2400 figure come from?
2,400 mm. Outwest Sleepers (Victorian supplier): concrete sleepers are supplied in 1800, 2000 and 2400 mm lengths. Checked against its source on 2026-11-18.
Where does the retaining sleeper height figure come from?
200 mm. Typical sleeper face height. No Australian supplier figure was read for this: check the height of the sleeper you will buy and change it. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Does this calculator work for New Zealand?
Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.
Does it show prices?
No. It gives quantities and a shopping list. Ask your supplier for prices.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.
Related calculators
- Concrete slabPath, patio, shed base or driveway: how much concrete you need, as bags or ready-mix, with the crushed-rock…
- Concrete for postsHow many 20 kg bags of Post Mix concrete to set posts: the hole is twice the post width and a third of the…
- Reo meshReinforcing mesh for a slab: how many sheets of SL62, SL72 or SL82 mesh, and how many bar chairs hold it off…
- BricksHow many bricks for a wall, and how many 20 kg bags of mortar mix to lay them, for a single skin or double…
- Concrete blocksHow many besser blocks for a wall, with mortar and core-fill concrete for reinforced walls.
- MortarHow many 20 kg bags of mortar mix for 1000 bricks or any number of bricks or blocks.
- PaintHow many litres of paint for a room, and which cans to buy, with doors, windows and the ceiling taken into…
- PlasterboardWalls and ceilings: how many plasterboard sheets, screws and bags of jointing compound, with cornice length.
- TilesFloor or wall tiles: how many tiles, how many boxes, bags of adhesive and grout, with waste for the layout.
- FlooringLaminate, vinyl plank or timber flooring: how many boxes to buy for a room, with waste for the layout and…
- PaversPatio or path: how many pavers, how much road base and how much bedding sand.
- Soil, gravel and mulchGarden beds, paths and driveways: cubic metres and tonnes of soil, sand, gravel, road base or mulch, with…
- TurfLawn turf rolls for a lawn, and the topsoil to lay them on, in square metres and cubic metres.
- FenceTimber paling or steel sheet fence: posts, rails, palings or panels, and bags of concrete for the post holes.
- DeckingTimber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at…
- Roofing sheetsMetal roof sheets: how many sheets of Custom Orb, Trimdek or Klip-Lok, how long they must be for the pitch…
- Weatherboard claddingFibre-cement weatherboards (Linea, Stria, HardiePlank): how many boards and packs for a wall, with the…
- Wall framingTimber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres.
- Insulation battsWall or ceiling batts: how many packs of insulation batts to buy for an area, from the pack coverage.