EnoughToGet CalculatorsGuides

Landscaping

Mulch, soil and gravel: how many cubic metres do I need?

By the EnoughToGet teamUpdated 2026-11-185 min readSources and assumptions

To determine how much mulch, soil, or gravel you need for a garden project, you must calculate the total volume by multiplying the surface area by the desired depth, then add a percentage for compaction and settling.

Try itSoil, gravel and mulch: enter your own sizes
m
Type metres, for example 4.5.
m
mm
Mulch is usually 75 to 100 mm, a gravel path about 50 mm, topsoil for a lawn about 100 mm.
Weights per cubic metre come from supplier data sheets. Loose road base is lighter than compacted road base.
%
Soil and mulch settle. For road base the depth is the finished, compacted layer and the loose volume is worked out for you.
Only used for the bag alternative. Check the volume on your bag.
You need
0.69 m³
about 0.28 t, or 23 bags of 30 L

Shopping list

ItemBuyNote
Mulch, woodchip, bulk0.69 m³about 0.28 t at 0.4 t/m³
Or bagged (30 L bags)23 bags690 L
How this was worked out
  1. Area: length × width
    4 × 2 = 8 m²
  2. Volume: area × depth ÷ 1000
    8.00 × 75 ÷ 1000 = 0.6 m³
  3. With extra: volume × (1 + allowance)
    0.600 × 1.15 = 0.69 m³
  4. Weight: volume with extra × density
    0.690 × 0.4 = 0.28 t
  5. Bags (30 L): litres with extra ÷ bag size, rounded up
    690 ÷ 30 = 23 bags

Understanding Volume and Area

When ordering garden materials, the most important unit of measurement is the cubic metre (m³). This represents a three-dimensional space, which is why you cannot simply measure the length and width of your garden bed; you must also account for how deep you intend to lay the material. For example, if you are covering a small area with a thin layer of mulch, the volume will be significantly lower than a deep layer of topsoil intended for a new garden bed.

To find the volume, you first calculate the surface area by multiplying the length of the area by its width. Once you have the area in square metres (m²), you multiply it by the depth in metres. Because most garden depths are measured in millimetres (mm), you must convert these to metres before multiplying. For instance, a depth of 100 mm is equal to 0.1 metres.

Bulk vs. Bagged Materials

Homeowners often face a choice between ordering materials in bulk or purchasing them in bags. Bulk ordering by the cubic metre suits larger projects, because the material is delivered by truck. However, bulk deliveries require space for the truck to enter and a way to move the material from the drop point to the garden.

Bagged materials offer convenience for very small jobs or areas where heavy machinery cannot reach. They are easier to transport by hand and allow for precise placement. When deciding which to choose, consider the total volume and how you will move the material. Ask your supplier for the price of both.

Weight and Density Factors

Knowing the volume is only half the battle; you also need to understand the weight of the material, especially if you are hiring a delivery service with weight limits or if you are planning to move the material yourself. Different materials have vastly different densities.

According to Australian Native Landscapes, the weight of various materials per cubic metre is as follows:

  • Woodchip mulch: 0.4 t/m³
  • Bark mulch: 0.3 t/m³
  • Topsoil: 1.4 t/m³
  • Blue metal (crushed rock): 1.45 t/m³
  • Road base (loose): 1.75 t/m³
  • Road base (compacted): 2.4 t/m³

These figures show that heavy materials like road base or blue metal weigh significantly more than lightweight organic materials like bark mulch. When ordering, always check if the supplier provides the weight for loose or compacted material, as this can change the tonnage significantly.

Compaction and Settling Allowances

One of the most common mistakes in garden projects is ordering the exact volume of the space without accounting for compaction. When you pour loose material like soil or gravel into a space and then walk on it, water it in, or use a roller, the material settles and compresses.

A common rule of thumb for the settling of loose fill when compacted is to add a 15% allowance to your total volume. This ensures that once the material has settled into its final position, you do not end up with a thin, insufficient layer. If you are laying a base for a path or driveway, this allowance is even more critical to ensure the surface remains level and stable.

Different garden materials serve different purposes and therefore require different depths. Australian Native Landscapes suggests that mulch should generally be applied to a depth of 100 mm. However, it is worth noting that some sources, such as Gardening Australia, suggest a depth of 20-60 mm for coarse mulch.

Topsoil is typically laid deeper to provide a nutrient-rich base for plants, often reaching 100 mm or more depending on the existing ground conditions. Road base and blue metal are used for structural purposes, where the depth is determined by the required load-bearing capacity of the area. Always check your product label or supplier for specific depth recommendations based on your intended use.

Quick reference table

The following table provides examples of different materials and dimensions to help you visualise how volume, weight, and bag counts vary.

MaterialArea (m²)Depth (mm)Bulk to order (m³)Weight (t)Bagged (30 L)
Mulch, woodchip8750.690.2823
Topsoil81000.921.2931
Bluemetal12500.69123
Road base181002.844.9795

Worked Example

To understand how to calculate your requirements, let's look at the first scenario from the table above: a woodchip mulch project.

  1. Calculate the Area: The length is 4 metres and the width is 2 metres.

4 m x 2 m = 8 m².

  1. Calculate the Base Volume: The desired depth is 75 mm, which is 0.075 metres.

8 m² x 0.075 m = 0.6 m³.

  1. Add the Compaction Allowance: We add a 15% allowance for settling.

0.6 m³ x 1.15 = 0.69 m³.

  1. Determine the Weight: Using the density for woodchip mulch (0.4 t/m³).

0.69 m³ x 0.4 t/m³ = 0.276 t (rounded to 0.28 t).

  1. Calculate Bagged Quantity: A standard retail bag is 30 L. Since there are 1,000 litres in a cubic metre, we convert the volume to litres.

0.69 m³ x 1,000 = 690 L. 690 L / 30 L = 23 bags.

Common Mistakes

One of the most frequent errors is failing to convert millimetres to metres before multiplying. If you multiply your area by 100 instead of 0.1, your order will be 1,000 times larger than necessary. Another common mistake is forgetting the compaction allowance; without it, your garden bed will likely look "thin" once the material settles.

Additionally, some people assume that all mulch has the same weight. As shown in the density facts, bark mulch is significantly lighter than woodchip mulch. If you are ordering by weight rather than volume, using the wrong density figure can lead to a significant shortage of material. Always verify the specific density of the product with your supplier.

Frequently Asked Questions

How do I convert litres to cubic metres?

There are 1,000 litres in 1 cubic metre. To convert, divide your total litres by 1,000.

What is the standard bag size for garden soil?

A common retail bag size seen in listings is 30 L. However, you should always check your product label or supplier for the specific size.

Why does the weight of road base change?

Road base weight varies depending on whether it is loose or compacted, so the calculator treats the depth as the finished compacted layer and works out the larger loose volume you order. Loose road base is approximately 1.75 t/m³, while compacted road base can reach 2.4 t/m³.

How much extra should I order for settling?

A common rule of thumb for the settling of loose fill when compacted is a 15% allowance.

Does the calculator work for New Zealand?

The calculator provides results for Australian measurements. There are no specific differences noted for New Zealand in the provided data.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
landscape compaction allowance15 %Editable defaultcommon rule of thumb for settling of loose fill when compacted, editable
landscape bag size 25l25 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape bag size 30l30 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape bag size 40l40 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape bag size 50l50 LEditable defaultcommon retail bag size seen in Bunnings listings (page not fetchable), editable
landscape density topsoil1.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: topsoil 1.4 t/m3.
landscape density garden mix1.2 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: garden mix 1.2 t/m3.
landscape density sand brickies1.45 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: brickies sand 1.45 t/m3.
landscape density sand river1.5 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: river sand 1.5 t/m3.
landscape density bluemetal1.45 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: blue metal 1.45 t/m3.
landscape density gravel river1.55 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: river gravel 1.55 t/m3.
landscape density roadbase loose1.75 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: road base/DGB/FCR 1.75 t/m3 (indicative, loose).
landscape density mulch woodchip0.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: woodchip mulch 0.4 t/m3.
landscape density mulch bark0.3 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: bark mulch 0.3 t/m3.
landscape density roadbase compacted2.4 t/m3Verified 2026-11-18Australian Native Landscapes product weights FAQ: road base/DGB/FCR 2.4 t/m3 (compacted figure).
landscape mulch depth100 mmVerified 2026-11-18Australian Native Landscapes mulch FAQ: mulch should be applied to a depth of 100 mm (Gardening Australia suggests 20-60 mm for coarse mulch).
landscape mulch depth light75 mmEditable defaultcommonly quoted 75 mm garden bed mulch depth, editable
landscape topsoil lawn depth100 mmEditable defaulttypical topsoil depth for a new lawn, rule of thumb, editable
landscape gravel path depth50 mmEditable defaulttypical gravel path top layer over compacted base, rule of thumb, editable

Keep reading