Floors & tiles
How many tiles do I need for a bathroom floor?
To determine how many tiles you need for a bathroom floor, you must calculate the total floor area in square metres, divide by the area of a single tile, and then add a waste percentage based on your chosen layout pattern.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Tiles, 300 × 300 mm | 53 tiles | 10% waste for a straight layout |
| Tile adhesive, 20 kg bags (Davco Ceramaflex type, 6 mm notch) | 1 bag | 14 m² per bag |
| Grout (300 × 300 × 10 mm tile, 3 mm joint) | 2.38 kg | Davco Sanitized Colorgrout coverage table |
- Buy all tiles from the same batch, and keep a few spare for repairs.
How this was worked out
- Area:
length × width + extra
2.4 × 1.8 + 0 = 4.32 m² - One tile:
from the tile size
300 × 300 mm = 0.09 m² - Tiles:
area × (1 + waste) ÷ tile area, rounded up
4.32 × 1.10 ÷ 0.09 = 52.8 tiles - Adhesive:
area ÷ coverage per 20 kg bag, rounded up
4.32 ÷ 14 = 1 bags - Grout:
area × kg per m² × (1 + waste)
4.32 × 0.5 × 1.10 = 2.38 kg
Calculating Your Floor Area
The first step in any tiling project is determining the total surface area of the floor. For a small bathroom, this is typically done by measuring the length and width of the room in metres. Once you have these two measurements, multiply them together to find the total area in square metres (m²). For example, a room measuring 2.4 metres by 1.8 metres results in a total area of 4.32 m². Knowing this figure is essential because it serves as the baseline for every other material calculation, including the number of tiles, the amount of adhesive required, and the quantity of grout needed.
Understanding Tile Sizes and Coverage
Different tiles cover different amounts of surface area. It is important to know the exact dimensions of the tile you intend to purchase to ensure your calculations are accurate. According to Beaumont Tiles, common size categories include 200 x 200 mm tiles, which have an area of 0.04 m² per tile, and 300 x 300 mm tiles, which have an area of 0.09 m² per tile. Larger formats, such as the 400 x 600 mm tile found on the National Tiles Muralla Ocre product page, cover an area of 0.24 m² per tile. You can use these figures to determine how many individual pieces are required to cover your calculated floor area.
Accounting for Layout Waste
You should never order the exact number of tiles required to cover your floor area. Cutting tiles to fit against walls, around corners, or into specific shapes inevitably leads to waste. The amount of waste you should account for depends heavily on the pattern you choose. National Tiles suggests the following waste percentages for different layouts:
* Straight or standard layout: 10% * Diagonal or complex layout: 15% * Herringbone or intricate pattern: 30%
By applying these percentages to your base tile count, you ensure you have enough material to complete the job without running short due to offcuts.
Adhesive Requirements
Tile adhesive is the bonding agent that holds your tiles to the floor. The amount of adhesive you need depends on the size of the bag, the notch size of your trowel, and the specific product type. For instance, Sika Davco Ceramaflex 20 kg bags cover approximately 14 m² when using a 6 mm notch trowel. However, other products have different coverage rates. Sika Davco Ceramacrete 20 kg bags cover approximately 6.5 m² (the midpoint of 6-7 m²) with a 6 mm notched trowel. If you are using a larger 10 mm notched trowel, Sika Davco SMP EVO 20 kg bags also cover approximately 6.5 m² (the midpoint of 6-7 m²). Always check your product label or supplier to confirm the coverage for the specific adhesive you choose.
Grout Coverage and Waste
Grout fills the joints between your tiles. The amount of grout required is determined by the size of the tile, the thickness of the tile, and the width of the joint. For a 300 x 300 x 10 mm tile with a 3 mm joint, Sika Davco Sanitized Colorgrout has a coverage rate of 0.5 kg/m². When ordering grout, you should also account for waste. Sika Davco Sanitized Colorgrout recommends adding 10-15% more material for wastage; for these calculations, the lower end of 10% is used.
Quick reference table
| Layout / Tile Size | Floor Area | Tile Size | Tile Count | Adhesive (20 kg bags) | Grout (kg) |
|---|---|---|---|---|---|
| Straight (300x300) | 4.32 m² | 300 x 300 mm | 53 | 1 bag | 2.38 kg |
| Diagonal (300x300) | 4.32 m² | 300 x 300 mm | 56 | 1 bag | 2.38 kg |
| Herringbone (300x300) | 4.32 m² | 300 x 300 mm | 63 | 1 bag | 2.38 kg |
| Straight (400x600) | 12.0 m² | 400 x 600 mm | 55 | 1 bag | N/A |
Worked example
This example follows the first example for a straight layout using 300 x 300 mm tiles.
- Area: The floor dimensions are 2.4 metres by 1.8 metres, resulting in a total area of 4.32 m².
- One tile: A 300 x 300 mm tile has an area of 0.09 m².
- Tiles: Dividing the area (4.32 m²) by the tile area (0.09 m²) gives a base count of 52.8 tiles.
- Waste: For a straight layout, a 10% waste factor is applied.
- Rounded purchase: The final count, including waste, is 53 tiles.
- Adhesive: Based on the coverage for a 6 mm notch, 1 bag of adhesive is required.
- Grout: Based on the coverage of 0.5 kg/m² plus 10% waste, the total is 2.38 kg.
Common mistakes
One of the most frequent mistakes is failing to account for the specific waste percentage associated with the chosen pattern. While a straight layout only requires a 10% buffer, a herringbone pattern requires 30% because of the significant amount of cutting involved at the edges. Another common error is using the wrong adhesive coverage rate. For example, using a 6 mm notch trowel with a product rated for a different coverage can lead to running out of adhesive before the floor is finished. Finally, forgetting to account for grout waste can result in a shortage, as some material is always lost during the application process.
Frequently asked questions
How do I calculate the area of my bathroom floor?
Measure the length and width of the floor in metres and multiply the two numbers together to get the total square metres.
Why do I need to order more tiles than the floor area suggests?
You need extra tiles to account for "waste," which is the material lost when tiles are cut to fit against walls, around corners, or into specific patterns.
Does the layout pattern change how many tiles I need?
Yes. Simple straight layouts require less waste (10%) than diagonal layouts (15%), and intricate patterns like herringbone require significantly more waste (30%).
How much adhesive should I buy for a 4.32 m² area?
This depends on the specific adhesive and trowel size. For example, Sika Davco Ceramaflex covers 14 m² per 20 kg bag with a 6 mm notch, while Sika Davco Ceramacrete covers 6.5 m² per 20 kg bag with a 6 mm notch.
Is there a difference in calculations for New Zealand?
The tile and adhesive figures on this page come from Australian makers. For New Zealand products, check the coverage on your own tile and adhesive packaging.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.